<%NUMBERING1%>.<%NUMBERING2%>.<%NUMBERING3%> PRTG Manual: WMI Share Sensor

Shares

Select the shares that you want to monitor. PRTG creates one sensor for each share that you select.

Enable check boxes in front of the respective lines to select the items. Use the check box in the table header to select all items or to cancel the selection. In large tables, use the search function in the upper-right corner.

To provide any shares, the LanmanServer "Server" Windows service must run on the target computer. If it does not run, there are no shares and you see a No Share available message.

Sensor Name

Enter a name to identify the sensor.

Parent Tags

Shows tags that the sensor inherits from its parent device, parent group, and parent probe.

This setting is for your information only. You cannot change it.

Tags

Enter one or more tags. Confirm each tag with the Spacebar key, a comma, or the Enter key. You can use tags to group objects and use tag-filtered views later on. Tags are not case-sensitive. Tags are automatically inherited.

It is not possible to enter tags with a leading plus (+) or minus (-) sign, nor tags with parentheses (()) or angle brackets (<>).

For performance reasons, it can take some minutes until you can filter for new tags that you added.

The sensor has the following default tags that are automatically predefined in the sensor's settings when you add the sensor:

• wmisharesensor

Priority

Select a priority for the sensor. This setting determines the position of the sensor in lists. The highest priority is at the top of a list. Choose from the lowest priority () to the highest priority ().

Shared Resource

Shows information about the shared resource that this sensor monitors.

PRTG shows this value for reference purposes only. If you need to change this value, add the sensor anew.

Description

Shows the description of the shared resource that this sensor monitors.

PRTG shows this value for reference purposes only. If you need to change this value, add the sensor anew.

Type

Shows the type of the shared resource that this sensor monitors.

PRTG shows this value for reference purposes only. If you need to change this value, add the sensor anew.

TypeID

Shows the typeID of the shared resource that this sensor monitors.

PRTG shows this value for reference purposes only. If you need to change this value, add the sensor anew.

Error

Set the sensor to the Down status if the share returns an error status. A share in this status is not operational.

This condition is enabled by default.

Degraded

Set the sensor to the Down status if the share returns a degraded status. A share in this status is still operational.

This condition is enabled by default.

Unknown

Set the sensor to the Down status if the share returns an unknown status.

Pred Fail

Set the sensor to the Down status if the share returns a predicted fail status. This indicates that an element works properly but predicts a failure (for example, a SMART-enabled hard drive). A share in this status is still operational.

This condition is enabled by default.

Starting

Set the sensor to the Down status if the share returns a starting status. A share in this status is not operational.

Stopping

Set the sensor to the Down status if the share returns a stopping status. A share in this status is not operational.

Service

Set the sensor to the Down status if the share returns a service status. This can apply during disk mirror-resilvering, reloading a user permissions list, or other administrative work on the device that this sensor monitors. Not all such work is done online, but the managed element is neither OK nor has one of the other states. A share in this status is not operational.

Stressed

Set the sensor to the Down status if the share returns a stressed status.

Nonrecover

Set the sensor to the Down status if the share returns a non recover status.

This condition is enabled by default.

NoContact

Set the sensor to the Down status if the share returns a no contact status.

This condition is enabled by default.

LostComm

Set the sensor to the Down status if the share returns a lost communication status.

This condition is enabled by default.

Result Handling

Define what PRTG does with the sensor result:

• Discard result: Do not store the sensor result.

• Store result: Store the last sensor result in the \Logs\sensors subfolder of the PRTG data directory on the probe system. The file name is Result of Sensor [ID].Data.txt. This setting is for debugging purposes. PRTG overwrites this file with each scanning interval.

In a cluster, PRTG stores the result in the PRTG data directory of the master node.

Primary Channel

Select a channel from the list to define it as the primary channel. In the device tree, the last value of the primary channel is always displayed below the sensor's name. The available options depend on what channels are available for this sensor.

You can set a different primary channel later by clicking below a channel gauge on the sensor's Overview tab.

Graph Type

Define how different channels are shown for this sensor:

• Show channels independently (default): Show a graph for each channel.
• Stack channels on top of each other: Stack channels on top of each other to create a multi-channel graph. This generates a graph that visualizes the different components of your total traffic.
  You cannot use this option in combination with manual Vertical Axis Scaling (available in the channel settings).

Stack Unit

This setting is only visible if you enable Stack channels on top of each other as Graph Type. Select a unit from the list. All channels with this unit are stacked on top of each other. By default, you cannot exclude single channels from stacking if they use the selected unit. However, there is an advanced procedure to do so.

Available

The availability of the share in milliseconds (msec)

This channel is the primary channel by default.

Downtime

In the channel table on the Overview tab, this channel never shows any values. PRTG uses this channel in graphs and reports to show the amount of time in which the sensor was in the Down status in percent.